IMPORTANT:  In order for shelves to operate properly, drawer bracket and guides must be square.

To square bracket and guides follow this procedure:

1.     Remove Help My Shelf from bracket drawer guides.  You will need to tilt front of Help My Shelf slightly upwards to release the Help My Shelf from the guides secured to the bracket.

2.     Center front bracket between the cabinet opening.  Make sure the front of the guides (A) behind the face frame. Screw down the front bracket.

3.     Measure distance from front bracket side to cabinet wall side – see (B) in drawing – either right or left inside wall of the cabinet.  Note distance: __________

4.     Move back bracket so it is the same distance from inside wall as measurement (B) of front bracket in Step 2.

 

5.     Hold back bracket in place and screw down to shelf.  Your bracket is now square.

6.     Replace Help My Shelf on bracket drawer guides inside your cabinet.  To replace Help My Shelf on drawer guides, slightly tilt front of Help My Shelf upwards and align drawer guide wheels on guide.

¨  NOTE:  If mounting Help My Shelves to adjustable cabinet shelves, cabinet shelves must first be secured to avoid shelf tipping when Help Your Shelf if extended.

  

Door Bumper guards are included in your package.  Install the bumper guard on the right or left front side of your Help Your Shelf on the same side as the cabinet door.  The lip on the bumper guard is placed on the front of the Help Your Shelf, with the longer part of the guard placed along the side of the Help My Shelf.  The guard is screwed in along the side of the Help My Shelf.